rilpoint_mw113

Hálózat

(Változatok közti eltérés)
(Új oldal, tartalma: „Router: 2801 NM-ESW-161 Munkaállomások: * 192.168.1.10/24, GW: 192.168.1.1 * 192.168.2.10/24, GW: 192.168.2.1 Switch> Switch>ena Switch#conf term Enter configuration c…”)
5. sor: 5. sor:
* 192.168.2.10/24, GW: 192.168.2.1
* 192.168.2.10/24, GW: 192.168.2.1
-
Switch>
+
  Switch>
-
Switch>ena
+
  Switch>ena
-
Switch#conf term
+
  Switch#conf term
-
Enter configuration commands, one per line.  End with CNTL/Z.
+
  Enter configuration commands, one per line.  End with CNTL/Z.
-
Switch(config)#enable password pass1
+
  Switch(config)#enable password pass1
-
Switch(config)#enable secret pass2
+
  Switch(config)#enable secret pass2
-
Switch(config)#banner motd #
+
  Switch(config)#banner motd #
-
Enter TEXT message.  End with the character '#'.
+
  Enter TEXT message.  End with the character '#'.
-
Hello, ez a teszt router
+
  Hello, ez a teszt router
-
#
+
  #
-
Switch(config)#hostname router-1
+
  Switch(config)#hostname router-1
-
router-1(config)#exit
+
  router-1(config)#exit
-
router-1(config)#exit
+
  router-1(config)#exit
-
Press RETURN to get started.
+
  Press RETURN to get started.
-
Hello, ez a teszt router
+
  Hello, ez a teszt router
-
router-1>enable
+
  router-1>enable
-
Password: <pass2>
+
  Password: <pass2>
-
router-1#sh int
+
  router-1#sh int
-
FastEthernet0/1 is down, line protocol is down (disabled)
+
  FastEthernet0/1 is down, line protocol is down (disabled)
-
  Hardware is Lance, address is 0060.3ee9.7601 (bia 0060.3ee9.7601)
+
    Hardware is Lance, address is 0060.3ee9.7601 (bia 0060.3ee9.7601)
-
BW 100000 Kbit, DLY 1000 usec,
+
  BW 100000 Kbit, DLY 1000 usec,
-
    reliability 255/255, txload 1/255, rxload 1/255
+
      reliability 255/255, txload 1/255, rxload 1/255
-
  Encapsulation ARPA, loopback not set
+
    Encapsulation ARPA, loopback not set
-
  Keepalive set (10 sec)
+
    Keepalive set (10 sec)
-
  Half-duplex, 100Mb/s
+
    Half-duplex, 100Mb/s
-
  input flow-control is off, output flow-control is off
+
    input flow-control is off, output flow-control is off
-
  ARP type: ARPA, ARP Timeout 04:00:00
+
    ARP type: ARPA, ARP Timeout 04:00:00
-
  Last input 00:00:08, output 00:00:05, output hang never
+
    Last input 00:00:08, output 00:00:05, output hang never
-
  Last clearing of "show interface" counters never
+
    Last clearing of "show interface" counters never
-
  Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0
+
    Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0
-
  Queueing strategy: fifo
+
    Queueing strategy: fifo
-
  Output queue :0/40 (size/max)
+
    Output queue :0/40 (size/max)
-
  5 minute input rate 0 bits/sec, 0 packets/sec
+
    5 minute input rate 0 bits/sec, 0 packets/sec
-
  5 minute output rate 0 bits/sec, 0 packets/sec
+
    5 minute output rate 0 bits/sec, 0 packets/sec
-
    956 packets input, 193351 bytes, 0 no buffer
+
      956 packets input, 193351 bytes, 0 no buffer
-
    Received 956 broadcasts, 0 runts, 0 giants, 0 throttles
+
      Received 956 broadcasts, 0 runts, 0 giants, 0 throttles
-
    0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
+
      0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
-
    0 watchdog, 0 multicast, 0 pause input
+
      0 watchdog, 0 multicast, 0 pause input
-
    0 input packets with dribble condition detected
+
      0 input packets with dribble condition detected
-
    2357 packets output, 263570 bytes, 0 underruns
+
      2357 packets output, 263570 bytes, 0 underruns
-
    0 output errors, 0 collisions, 10 interface resets
+
      0 output errors, 0 collisions, 10 interface resets
-
    0 babbles, 0 late collision, 0 deferred
+
      0 babbles, 0 late collision, 0 deferred
-
    0 lost carrier, 0 no carrier
+
      0 lost carrier, 0 no carrier
-
    0 output buffer failures, 0 output buffers swapped out
+
      0 output buffer failures, 0 output buffers swapped out
-
router-1#conf term
+
  router-1#conf term
-
Enter configuration commands, one per line.  End with CNTL/Z.
+
  Enter configuration commands, one per line.  End with CNTL/Z.
-
router-1(config)#int fa0/0
+
  router-1(config)#int fa0/0
-
router-1(config-if)#ip address 192.168.1.1 255.255.255.0
+
  router-1(config-if)#ip address 192.168.1.1 255.255.255.0
-
router-1(config-if)#no shutdown
+
  router-1(config-if)#no shutdown
-
router-1(config-if)#description Telephely
+
  router-1(config-if)#description Telephely
-
router-1(config-if)#exit
+
  router-1(config-if)#exit
-
router-1(config)#int fa0/1
+
  router-1(config)#int fa0/1
-
router-1(config-if)#ip address 192.168.2.1 255.255.255.0
+
  router-1(config-if)#ip address 192.168.2.1 255.255.255.0
-
router-1(config-if)#no sh
+
  router-1(config-if)#no sh
-
router-1(config-if)#description Iroda
+
  router-1(config-if)#description Iroda
-
router-1(config-if)#exit
+
  router-1(config-if)#exit
-
router-1(config)#exit
+
  router-1(config)#exit
-
router-1#sh ip int brief
+
  router-1#sh ip int brief
-
Interface              IP-Address      OK? Method Status                Protocol
+
  Interface              IP-Address      OK? Method Status                Protocol
-
FastEthernet0/0        192.168.1.1    YES manual up                    up
+
  FastEthernet0/0        192.168.1.1    YES manual up                    up
-
FastEthernet0/1        192.168.2.1    YES manual up                    up
+
  FastEthernet0/1        192.168.2.1    YES manual up                    up
-
Vlan1                  unassigned      YES unset  administratively down down
+
  Vlan1                  unassigned      YES unset  administratively down down
-
router-1#
+
  router-1#
-
(gép pingeljen)
+
  (gép pingeljen)
-
router-1#conf term
+
  router-1#conf term
-
Enter configuration commands, one per line.  End with CNTL/Z.
+
  Enter configuration commands, one per line.  End with CNTL/Z.
-
router-1(config)#ip route 192.168.1.0 255.255.255.0 FastEthernet0/0
+
  router-1(config)#ip route 192.168.1.0 255.255.255.0 FastEthernet0/0
-
router-1(config)#ip route 192.168.2.0 255.255.255.0 FastEthernet0/1
+
  router-1(config)#ip route 192.168.2.0 255.255.255.0 FastEthernet0/1
-
router-1(config-if)#exit
+
  router-1(config-if)#exit
-
router-1>sh ip route
+
  router-1>sh ip route
-
Codes: C - connected, S - static, I - IGRP, R - RIP, M - mobile, B - BGP
+
  Codes: C - connected, S - static, I - IGRP, R - RIP, M - mobile, B - BGP
-
      D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
+
        D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
-
      N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
+
        N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
-
      E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP
+
        E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP
-
      i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, ia - IS-IS inter area
+
        i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, ia - IS-IS inter area
-
      * - candidate default, U - per-user static route, o - ODR
+
        * - candidate default, U - per-user static route, o - ODR
-
      P - periodic downloaded static route
+
        P - periodic downloaded static route
-
Gateway of last resort is not set
+
  Gateway of last resort is not set
-
C    192.168.1.0/24 is directly connected, FastEthernet0/0
+
  C    192.168.1.0/24 is directly connected, FastEthernet0/0
-
C    192.168.2.0/24 is directly connected, FastEthernet0/1
+
  C    192.168.2.0/24 is directly connected, FastEthernet0/1
-
R1>ena
+
  R1>ena
-
Password:
+
  Password:
-
R1# sh run
+
  R1# sh run
-
R1#copy run sta
+
  R1#copy run sta
-
Destination filename [startup-config]?
+
  Destination filename [startup-config]?
-
Building configuration...
+
  Building configuration...
-
[OK]
+
  [OK]
-
R1#
+
  R1#
-
R1#reload
+
  R1#reload
-
Proceed with reload? [confirm]
+
  Proceed with reload? [confirm]

A lap 2019. május 2., 12:22-kori változata

Router: 2801 NM-ESW-161

Munkaállomások:

  • 192.168.1.10/24, GW: 192.168.1.1
  • 192.168.2.10/24, GW: 192.168.2.1
 Switch>
 Switch>ena
 Switch#conf term
 Enter configuration commands, one per line.  End with CNTL/Z.
 Switch(config)#enable password pass1
 Switch(config)#enable secret pass2
 Switch(config)#banner motd #
 Enter TEXT message.  End with the character '#'.
 Hello, ez a teszt router
 #
 Switch(config)#hostname router-1
 router-1(config)#exit
 router-1(config)#exit
 Press RETURN to get started.
 Hello, ez a teszt router
 router-1>enable
 Password: <pass2>
 router-1#sh int
 FastEthernet0/1 is down, line protocol is down (disabled)
   Hardware is Lance, address is 0060.3ee9.7601 (bia 0060.3ee9.7601)
  BW 100000 Kbit, DLY 1000 usec,
      reliability 255/255, txload 1/255, rxload 1/255
   Encapsulation ARPA, loopback not set
   Keepalive set (10 sec)
   Half-duplex, 100Mb/s
   input flow-control is off, output flow-control is off
   ARP type: ARPA, ARP Timeout 04:00:00
   Last input 00:00:08, output 00:00:05, output hang never
   Last clearing of "show interface" counters never
   Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0
   Queueing strategy: fifo
   Output queue :0/40 (size/max)
   5 minute input rate 0 bits/sec, 0 packets/sec
   5 minute output rate 0 bits/sec, 0 packets/sec
      956 packets input, 193351 bytes, 0 no buffer
      Received 956 broadcasts, 0 runts, 0 giants, 0 throttles
      0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
      0 watchdog, 0 multicast, 0 pause input
      0 input packets with dribble condition detected
      2357 packets output, 263570 bytes, 0 underruns
      0 output errors, 0 collisions, 10 interface resets
      0 babbles, 0 late collision, 0 deferred
      0 lost carrier, 0 no carrier
      0 output buffer failures, 0 output buffers swapped out
 router-1#conf term
 Enter configuration commands, one per line.  End with CNTL/Z.
 router-1(config)#int fa0/0
 router-1(config-if)#ip address 192.168.1.1 255.255.255.0
 router-1(config-if)#no shutdown
 router-1(config-if)#description Telephely
 router-1(config-if)#exit
 router-1(config)#int fa0/1
 router-1(config-if)#ip address 192.168.2.1 255.255.255.0
 router-1(config-if)#no sh
 router-1(config-if)#description Iroda
 router-1(config-if)#exit
 router-1(config)#exit
 router-1#sh ip int brief
 Interface              IP-Address      OK? Method Status                Protocol
 FastEthernet0/0        192.168.1.1     YES manual up                    up
 FastEthernet0/1        192.168.2.1     YES manual up                    up
 Vlan1                  unassigned      YES unset  administratively down down
 router-1#
 (gép pingeljen)
 router-1#conf term
 Enter configuration commands, one per line.  End with CNTL/Z.
 router-1(config)#ip route 192.168.1.0 255.255.255.0 FastEthernet0/0
 router-1(config)#ip route 192.168.2.0 255.255.255.0 FastEthernet0/1
 router-1(config-if)#exit
 router-1>sh ip route
 Codes: C - connected, S - static, I - IGRP, R - RIP, M - mobile, B - BGP
        D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
        N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
        E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP
        i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, ia - IS-IS inter area
        * - candidate default, U - per-user static route, o - ODR
        P - periodic downloaded static route
 Gateway of last resort is not set
 C    192.168.1.0/24 is directly connected, FastEthernet0/0
 C    192.168.2.0/24 is directly connected, FastEthernet0/1


 R1>ena
 Password:
 R1# sh run
 R1#copy run sta
 Destination filename [startup-config]?
 Building configuration...
 [OK]
 R1#
 R1#reload
 Proceed with reload? [confirm]
Skin by RIL Partner